Chugger T-Max Tri-TCPSSMAX-CI TEFC Brew Pump .125 HP, 115 & 230 Volt AC Motor, 1 1/2″ Molded Tri-Clamp Fittings. Ryton / Teflon / Glass Impeller, Stainless Steel Housings, Ceramic Washers and Silicon O-Ring. FDA Compliant Materials Components are UL recognized, 17 GPM @ 12 PSI, Comes with a 55″ Cord without Plug.
UPC Code: 852575006570
3D View (Must be downloaded and viewed in Adobe)
TRI-TCPSSMAX-CI Tri Clover T-Max CHUGGER PUMP® Stainless Steel Center Inlet Model. Chugger Max Series Brew Pump has a .125 HP, 115 Volt AC Motor (Switchable to 230 Volt), Molded (Not Welded) 1 1/2″ Tri Clamp Fittings. Ryton / Teflon / Glass Impeller, 316 SS Front and Rear Housing, Ceramic Washers and Silicon O-Ring. FDA Compliant Materials Components are UL recognized. 17 GPM @ 12 PSI.
1 1/2″ Molded Tri-Clamp Connections
Tri-Clover fittings are the perfect way to bring sanitary connections, found in commercial brewing applications, to your home brew setup. Wineries and Breweries use tri clamps to provide a sanitary connections between tubing and pipes.
- Max Flow: 17 GPM
- Max Head: 27 Feet
- Max Temp: 250° F
- Power: 1/8 HP (.125 HP)
- Electrical: 115 / 230 Volt (Voltage Switch On Top of Casing)
- 55″ Cord (No Plug, Should be wired by an electrician)
- Hertz: 50/60
- PSI: 12
- TEFC (Totally Enclosed Fan Cooled) Motor
- Motor Only: 1.4 Amps
- Motor and Pump: 2.0 Amps
- Materials are FDA Food Compliant
- Components are UL Recognized
- Chugger Max contains sealed bearings. No oil necessary.
- UPC: 852575006167
Note: This is NOT a Self-Priming Pump. DO NOT RUN DRY!
|Dimensions||14 x 7 x 9 in|
1 1/2″ Molded Tri-Clamp Fittings
115 / 230 Volt (Switchable)
50 / 60 Hz
|Max Liquid Temperature||
|Pounds Per Square Inch||
55″ Cord (No Plug)