CPSSMAX-CI-1 (115v)

CHUGGER PUMP® CPSSMAX-CI-1 Stainless Steel Center – Chugger Max Series Brew Pump is .125 HP, 115 Volt AC Motor, 1″ FPT x 1/2″ MPT, Ryton / Teflon / Glass Impeller, 316 SS Front and Rear Housing, Ceramic Washers and Silicon O-Ring. FDA Compliant Materials Components are UL recognized. 55″ Cord with Plug, 17 GPM @ 12 PSI & Minimum ID Inlet 3/4″

Datasheet & Dimensional Drawings

SKU: CPSSMAX-CI-1 Category: Tags: , , ,

Product Description


Chugger Max CPSSMAX-CI-1 316 STAINLESS STEEL (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton / Teflon Impeller.

1″FPT x 1/2″ MPT

  • Max Flow: 17 GPM
  • Max Head: 27 FT
  • Max Temp: 250° F
  • Power:  1/8 HP (.125 HP)
  • Electrical: 115 Volt
  • Hz: 50/60
  • PSI: 12
  • RPM: 3500
  • Fan Cooled Motor
  • Motor Only: 1.4 Amps
  • Motor and Pump: 2.0 Amps
  • Materials are FDA Food Compliant
  • Components are UL Recognized
  • Chugger Max contains sealed bearings. No oil necessary.

The ETL Listed Mark indicates to distributors, retailers and customers that your product has been tested by Intertek and found in compliance with accepted national standards. Click Here for more information.

Additional Information




1″ FPT Inlet & 1/2″ MPT Outlet

Max Flow

17 GPM

Max Head

27 Feet


1/8 HP


115 Volt


50 / 60 Hz

Max Liquid Temperature

250° F


8 Lbs

Minimum ID Inlet


Pounds Per Square Inch

12 PSI

Product Warranty

CHUGGER PUMP® CPSSMAX-CI-1 (115v) is warranted only against defects in workmanship for a period of 6 months from the date of purchase. DO NOT RUN THE PUMP DRY, it will not be covered under warranty.

Product Installation

The CHUGGER PUMP® CPSSMAX-CI-1 (115v) is shipped ready for installation. Follow all local electrical safety codes and always disconnect power before performing work on or near the pump motor